Cut the mouth type

Release time: 2017-06-12 11:11:06

Hand torch is divided into three types g01-30 g01-100 g01-300 type, now listed as G01-100 shooting torch, are common with ordinary cutting gun type factory. G01-100 can cut low carbon steel maximum thickness of less than 100mm, g01-100 01 refers to the cutting mouth type 1, and (2), (3), and so on. The difference is that the size of the eyes and mouth is slim little and small incision.
       In addition, the cutting mouth is divided into two kinds, acetylene cutting mouth (a circle in the middle, also known as ring cut), Mei cut mouth (see plum, mainly used for liquefied petroleum gas, propane). Also called propane cutting nozzle. Cutting mouth cutting thickness is generally: 12mm below the following 1,20mm below 2,30mm below 3. If the workpiece is more stringent requirements (ie, the more stringent) can be mentioned in the specifications, such as account 12-20 mm 1. Select the appropriate cutting nozzle type. Mechanical cutting nozzle type selection depends on gas and cutting material and thickness considerations. In the cutting of 50mm thick material generally choose 1-4 # 50-100mm cutting mouth, it is recommended to choose 4-5 # cutting mouth, more than 100mm thick material is 6-7 # cutting mouth. The reason is that different thickness of the plate should be used with different cutting speed, cutting gas pressure and different cutting type, thickness 6-20mm plate due to thermal denaturation, at the beginning of cutting parts can not be cut from the edge of the board, perforated steel edge to Off, the steel plate cutting and the edge of the steel plate has a certain distance, thus limiting the part size error caused by degradation. Through the use of several cutting methods, you can ensure that CNC flame cutting machine cutting various parts of the dimensional accuracy and cutting efficiency. The operator's high volume, cutting mouth maintenance and operational skills are also related to the quality of CNC flame cutting machine cutting, is an important part can not be ignored.
       Ultra-industrial gas cutting nozzles
       A super-industrial gas cutting nozzle comprising a jacket (1) and an inner core (2). The inner core (2) is made of copper, the center hole (8), which includes the front handle (3), the core handle (4) and the core handle of the three parts (5). The upper surface of the front core (3) has 18 side grooves (6) which are conical. The core handle (5) has 6 side holes (7) in the same direction of the side channel (6). Cutting mouth can be combined with the collection and processing of gas flames to overcome the flame dispersion phenomenon, not only can improve the cutting efficiency, but also to ensure the quality of cutting, saving oxygen.