CNC flame cutting machine cutting mouth cleaning

Release time: 2017-06-12 11:04:47

Generally do not automatically increase the operation, the operation of CNC cutting machine cutting the workers should always pay attention to the cutting distance from the cutting edge, when the steel deformation or uneven to be adjusted. When using propane or natural gas as the gas, cutting the thickness to 50mm, the cut mouth height should be doubled. If necessary, to be adjusted.
       Another important factor in obtaining a good cutting surface is to set the correct spacing between the cutting tip and the workpiece. When the tip of the primary flame (flame core) is about 1 mm on the workpiece, it is the ideal spacing of the cut mouth, the distance of the cut mouth depends on the size of the cut mouth, with acetylene from 3 to 10 mm, with other gas from 6 a 12mm. The cutting head is easy to clog during the cutting process, and this time we need to clean the cut mouth.
       When cutting the cut mouth, turn off the preheat oxygen hand valve; press the cut oxygen button to open the cutting oxygen solenoid valve; turn off the cutting torch on the torch so that the nozzle can be inserted into the nozzle, In the fast oxygen hole twist up and down, and slowly open the torch to cut oxygen hand valve, here, Wuhan universal era CNC Technology Co., Ltd. to remind customers, please use the manufacturer recommended cutting nozzle, the use of inappropriate tools Will cause the mouth of the injury.